Firmware update lucky miner LV06

For a stable mining experience with the Lucky Miner LV06, keeping the firmware up-to-date is essential.
Follow these steps to update the firmware:

Firmware Update Download:

• • Click here for the latest firmware version for the Lucky Miner LV06.
  • The latest version is V2.3.0, which offers improved fault detection and overheating logic.

Preparation:

• • Ensure a stable Internet connection during the update process to avoid interruptions.
  • Use a computer with a compatible Web browser to access the miner's settings.

Firmware update:

• • Connect the LV06 to your network and note the IP address of the device.
  • Open a web browser and enter the IP address of the miner to access the web interface.
  • Navigate to the "Settings" tab and select "Update Firmware."
  • Upload the downloaded firmware file and start the update process.
  • Wait patiently for the update to complete and restart the mineral if necessary.

Important Notes:

• Do not interrupt the update process and ensure a stable power and network connection.
• After the update, some settings may need to be reconfigured.

By following these steps, you will ensure stable and efficient operation of your Lucky Miner LV06.

Version 2.3.0 Update:

1. Improved error detection for mining pools, increasing stability and reliability.
2. Upgraded overheating logic for improved performance and safety.
3. Resolved stability issues for a smoother user experience.

Note:

The firmware update takes time. Ensure a stable network during the upgrade. If the network is disconnected during the update, it will fail, with a failure rate of about 30%.

Don't have a Lucky Miner yet?
-> Buy here <-