Step 1: Setting up the Bitaxe Gamma starts here: Connect and power on<\/h2>\n\n![\"Setting](\"https:\/\/www.bitcoinstuffstore.com\/wp-content\/uploads\/2024\/01\/bitaxe_gamma_3d_stand.webp\" "\\"Bitcoin")
<\/figure>\n\n\nConnect the power adapter to the Bitaxe Gamma and plug it into an outlet.<\/p>\n\n
The device starts up immediately. Wait 30 to 60 seconds. During the very first startup, the miner sets itself as a Wi-Fi access point. You will see a network named bitaxe<\/code> or AxeOS<\/code> appear in your Wi-Fi list.<\/p>\n\nStep 2: Connect to the access point<\/h2>\n\n
Click on the bitaxe<\/code>-network. No password required.<\/p>\n\nOpen your browser and go to 192.168.4.1<\/code>. You see the AxeOS web interface: the control panel of your miner. From here, you manage everything.<\/p>\n\nStep 3: Set up Wi-Fi in AxeOS<\/h2>\n\n![\"Set](\"https:\/\/www.bitcoinstuffstore.com\/wp-content\/uploads\/2024\/01\/bitaxe-gamma-foam-box-1.webp\" "\\"Bitcoin")
<\/figure>\n\n\nIn AxeOS, go to the tab Settings<\/strong>.<\/p>\n\nFill in:
\n
\n- SSID<\/strong>name of your Wi-Fi network<\/li>
\n- Password<\/strong>: your Wi-Fi password<\/li>
\n<\/ul>
\nClick Save<\/strong> and then Reboot<\/strong>. The Bitaxe Gamma will restart and will now connect to your own network. The access point connection will be automatically disconnected.<\/p>\n\nStep 4: Look up new IP address<\/h2>\n\n
After the restart, your router assigned a new IP address to the Bitaxe Gamma.<\/p>\n\n
Look it up via:
\n
\n- The device list in your router interface<\/li>
\n - An IP scanner (Fing works well on mobile)<\/li>
\n - The OLED display on the miner itself (if your model has one)<\/li>
\n<\/ul>
\nType that IP address into your browser. You are back in AxeOS.<\/p>\n\nStep 5: Setting up the mining pool<\/h2>\n\n![\"Setting](\"https:\/\/www.bitcoinstuffstore.com\/wp-content\/uploads\/2025\/11\/Btclocks-and-bitaxe-supra.webp\" "\\"Bitcoin")
<\/figure>\n\n\nNow the pool.<\/p>\n\n
Go to Settings<\/strong> Okay Mining<\/strong> in AxeOS. Choose your pool and enter the stratum address:<\/p>\n\nPublic Pool (solo mining, popular among Bitaxe users):<\/strong>\n\n- Stratum URL:
stratum+tcp:\/\/public-pool.io<\/code><\/li>\n- Port:
21496<\/code><\/li>\n- Username: your bitcoin receiving address<\/li>\n<\/ul>\nOcean Pool (alternative):<\/strong>\n
\n- Stratum URL:
stratum+tcp:\/\/mine.ocean.xyz<\/code><\/li>\n- Port:
3334<\/code><\/li>\n- Username: your bitcoin address<\/li>\n<\/ul>\nBraiins Pool (alternative):<\/strong>\n
\n- Stratum URL:
stratum+tcp:\/\/stratum.braiins.com<\/code><\/li>\n- Port:
3333<\/code><\/li>\n- Username: your account username<\/li>\n<\/ul>\nWhich pool suits you? Solo mining via Public Pool gives a small chance at a full block. Pool mining via Braiins or Ocean gives small, regular payouts.\n\n
Step 6: Set worker name and save<\/h2>\n\n
Optionally add a worker name. Format: streetname.employeename<\/code>. Handy for when you have multiple miners later.<\/p>\n\nClick Save<\/strong> and then Reboot<\/strong>.<\/p>\n\nStep 7: Check hashrate and temperature<\/h2>\n\n![\"Bitaxe](\"https:\/\/www.bitcoinstuffstore.com\/wp-content\/uploads\/2026\/09\/bitaxe-gamma-vs-nerdqaxe.webp\" "\\"Bitcoin")
<\/figure>\n\n\nAfter 2 to 3 minutes you see the hashrate climb in AxeOS. The Bitaxe Gamma averages 1.0 to 1.4 TH\/s, depending on firmware and cooling.<\/p>\n\n
Check also:
\n
\n- Temperature<\/strong>must remain below 70 degrees Celsius<\/li>
\n- Accepted shares<\/strong>confirms that the pool acknowledges your contribution<\/li>
\n<\/ul>
\nDo you see accepted shares coming in? Then everything is working correctly.<\/p>\n\nStep 8: Check firmware<\/h2>\n\n
Check the active firmware version in AxeOS and compare it with the latest release on the official AxeOS GitHub page<\/a>. Outdated? Update via OTA Update<\/strong> in the settings menu.<\/p>\n\nDone: Setting up the Bitaxe Gamma is complete<\/h2>\n\n\n\n\n\n
Want more hashrate? Then check out the Bitaxe Supra<\/a>.<\/p>\n\nSetting the Bitaxe Gamma: Advanced AxeOS Settings<\/h2>\n\n
You've finished configuring the Bitaxe Gamma, and it's up and running. But AxeOS offers more than just the basic settings. Here are the settings that make the biggest difference in performance and reliability.<\/p>\n\n
Adjust voltage and frequency<\/h3>\n\n
By default, the Bitaxe Gamma operates at the factory settings for voltage and frequency. In the AxeOS settings under Settings > Mining<\/strong> find options to adjust this:<\/p>\n\n\n- Core Voltage<\/strong>standard around 1150-1200 mV. Lower voltage = lower power consumption but also less hashrate.<\/li>\n
- Core Frequency<\/strong>: standard around 490-550 MHz. Higher = more hashrate but also more heat.<\/li>\n<\/ul>\n\n
Safe rule of thumb: leave the factory settings as they are until you have the miner running stably for a few days. Make sure the temperature always stays below 75 degrees Celsius.<\/p>\n\n
ASIC autotune<\/h3>\n\n
AxeOS supports automatic tuning via the Autotune<\/strong>-function. This automatically calibrates voltage and frequency for the optimal combination of hashrate and temperature. Turn it on via Settings > Advanced<\/strong>.<\/p>\n\nBitaxe Setting the Gamma: What Is Solo Mining, and When Should You Choose It?<\/h2>\n\n
The Bitaxe Gamma is not a professional mining machine. It reaches about 1.1 TH\/s. For comparison: a modern Antminer S21 reaches 200+ TH\/s. That is about 180 times more.<\/p>\n\n
So why set the Bitaxe Gamma for solo mining?<\/p>\n\n
\n- Educational<\/strong>You understand how mining works because you run it yourself.<\/li>\n
- Ideological<\/strong>you are contributing to the decentralization of the network.<\/li>\n
- Lottery ticket<\/strong>Public Pool gives you a small chance at a full block of 3.125 BTC. Small, but not zero.<\/li>\n
- Power consumption<\/strong>: The Bitaxe Gamma consumes about 15 to 20 watts. This is negligible in terms of the energy bill.<\/li>\n<\/ul>\n\n
Do you really want to mine seriously? If so, the Bitaxe Gamma isn't the right device for you. But that's not what it's meant for anyway. Setting up the Bitaxe Gamma is a project, not a business plan.<\/p>\n\n
Setting the Bitaxe Gamma: Understanding the Connection to the Pool<\/h2>\n\n
Once you have finished configuring the Bitaxe Gamma and are connected to a pool, the miner submits work via the Stratum protocol. The pool divides the computational work into small pieces (shares) that the miner submits.<\/p>\n\n
Accepted shares<\/strong> means: the pool has verified and accepted your calculation.
\nRejected shares<\/strong> are not a disaster, but a high ratio is a sign that something is wrong with the connection or settings.<\/p>\n\nWith solo mining via Public Pool, every accepted share is proof that you are contributing to the network. Finding a block is unlikely, but the miner is doing its job.<\/p>\n\n
Setting the Bitaxe Gamma: Energy and Costs<\/h2>\n\n
Math problem for the pragmatic thinker:<\/p>\n\n
\n- Power consumption: ~15 watts<\/li>\n
- Per day: 0.015 kWh x 24 = 0.36 kWh<\/li>\n
- Per month: 0.36 x 30 = ~10.8 kWh<\/li>\n
- At 30 cents per kWh: ~3.25 euros per month<\/li>\n<\/ul>\n\n
For just a few euros a month, you get a miner that runs constantly, is educational, and gives you a small chance of mining a bitcoin block. That\u2019s the trade-off for most people who set up the Bitaxe Gamma.<\/p>\n\n
Setting the Bitaxe Gamma: The Open-Source Aspect<\/h2>\n\n
The Bitaxe project is completely open-source, both hardware and software. The schematics are on GitHub. The firmware is on GitHub. Anyone can build it, improve it, and continue developing it.<\/p>\n\n
In practice, the community actively contributes firmware updates, bug fixes and new features. AxeOS is updated regularly. Check the GitHub page for the latest releases. That is why the Bitaxe Gamma is popular with the technical Bitcoin community.<\/p>\n\n
Setting Up the Bitaxe Gamma: From Out of the Box to a Running Miner, A Summary<\/h2>\n\n
To summarize the steps for setting up the Bitaxe Gamma:<\/p>\n\n
\n- Connect to power, wait for access point<\/li>\n
- Connect via 192.168.4.1, set up Wi-Fi in AxeOS<\/li>\n
- Restart, look up new IP via router or Fing<\/li>\n
- Configure pool: stratum URL, port, bitcoin address as worker<\/li>\n
- Add worker name, save and restart<\/li>\n
- After 2-3 minutes: check hashrate and accepted shares<\/li>\n
- Verify firmware and update if necessary<\/li>\n
- Check temperature: keep below 70 degrees Celsius<\/li>\n<\/ol>\n\n
After configuring the Bitaxe Gamma, most devices will run stably without requiring further attention. Check the uptime and accepted shares once a week. That's all.<\/p>\n\n
Troubleshooting: most common problems<\/h2>\n\nWi-Fi connection failed<\/strong>\nCheck if your network is on 2.4 GHz. Are you hiding your SSID? Make it temporarily visible. Special characters in the password? Try a network without them.\n\nAxeOS unreachable after restart<\/strong>\nGive the miner 60 seconds. Use an IP scanner if you have lost the IP address. If necessary, assign a static IP address via your router.\n\nHashrate is at zero<\/strong>\nCheck the stratum address and port for typos. Check if the pool is online via the status page of the respective pool.\n\nTemperature above 70 degrees<\/strong>\nProvide better air circulation. An open space or a small USB fan next to the miner usually solves this.\n\nNo accepted shares after 10 minutes<\/strong>\nCheck your worker\/username settings. The bitcoin address must be valid. Some pools require a specific format.\n\nFrequently Asked Questions About Setting Up Bitaxe Gamma<\/h2>\n\n\nHow do I set the Bitaxe Gamma?<\/div>Plug the Bitaxe Gamma into a power source, then connect your device to the bitaxe<\/code>open Wi-Fi network 192.168.4.1<\/code> in the browser and configure your own Wi-Fi and mining pool via AxeOS. After a reboot, the miner is active.<\/div><\/div>\nHow do I connect the Bitaxe Gamma to Wi-Fi?<\/div>In AxeOS you go to Settings, enter your Wi-Fi network name (SSID) and password, and click Save and Reboot. The miner will then automatically connect to your network on 2.4 GHz.<\/div><\/div>\nWhich mining pool is suitable for the Bitaxe Gamma?<\/div>Public Pool is popular for solo mining. Braiins and Ocean Pool are alternatives for regular small payouts. Choose based on your strategy.<\/div><\/div>\nWhat is the hashrate of the Bitaxe Gamma?<\/div>On average 1.0 to 1.4 TH\/s, depending on firmware and cooling. The Bitaxe Gamma is a hobbyist device for home users who want to understand and support the Bitcoin network.<\/div><\/div>\nHow do I open the AxeOS interface on the Bitaxe Gamma?<\/div>Upon first startup via 192.168.4.1<\/code> to the built-in access point. Then via the IP address that your router has assigned.<\/div><\/div>\n<\/div>\nOn to your first hash<\/h2>\n\n\n\nP.S.<\/strong> Stuck? Feel free to ask, and I will help you out.Setting the Bitaxe Gamma: Advanced Tips<\/h2>\n\n
With a bit of extra attention you get more out of your miner and keep it healthy for longer.<\/p>\n
Adjust clock speed<\/h3>\n
In AxeOS, you can adjust the clock speed of the BM1370 chip. The default value is optimized for a balance between hashrate and temperature. If you want more hashrate, increase the clock speed. Keep an eye on the temperature: above 70 degrees is too hot.<\/p>\n
Set up automatic restart<\/h3>\n
In AxeOS, set up an automatic reboot if the pool connection is lost for more than 10 minutes. This prevents the miner from sitting idle without you noticing.<\/p>\n
Track results<\/h3>\n
Public Pool displays a dashboard for each bitcoin address. Bookmark the URL with your address. Here, you can see the submitted hashes and whether the network accepts them.<\/p>\n
Did you successfully configure the Bitaxe Gamma and want more hashrate? Check out the Bitaxe Supra<\/a> or the NerdQaxe++<\/a>.<\/p>\n\nSetting the Bitaxe Gamma: Additional Frequently Asked Questions<\/h2>\n\n\nCan I configure the Bitaxe Gamma without a computer?<\/div>Yes. All you need is a smartphone with a browser. Connect to the bitaxe Wi-Fi network, go to 192.168.4.1, and configure everything through the AxeOS web interface. You only need a computer if you want to update the firmware via OTA or the command line.<\/p><\/div><\/div>\n
How many miners can I connect to a pool?<\/div>Virtually unlimited. Each device is assigned its own worker name. You can configure dozens of Bitaxe Gamma devices on the same pool and bitcoin address. The pool registers each worker separately.<\/p><\/div><\/div>\n
What exactly is AxeOS?<\/div>AxeOS is the open-source web interface that runs on the Bitaxe Gamma itself. You can access it via a browser using the miner\u2019s IP address. Through AxeOS, you can manage Wi-Fi settings, pool configuration, voltage, frequency, and OTA updates. The name refers to the Bitaxe fork of the ESP-Miner project.<\/p><\/div><\/div>\n
Can I configure the Bitaxe Gamma on a 5 GHz network?<\/div>No. The built-in ESP32 Wi-Fi chip only supports 2.4 GHz. If you only have 5 GHz available, you must set up a router or access point that also broadcasts 2.4 GHz. Virtually all modern routers support both.<\/p><\/div><\/div>\n
Does the Bitaxe Gamma configuration also work via an Ethernet cable?<\/div>No. The Bitaxe Gamma does not have an Ethernet port. It connects exclusively via Wi-Fi. Ethernet is available on some other Bitaxe models, but not on the standard Gamma.<\/p><\/div><\/div>\n<\/div>\n
Setting the Bitaxe Gamma: Your Next Step<\/h2>\n\n
After a few weeks of running you get a better feel for hashrate variation, temperature and stability. You also learn what the miner needs from its environment.<\/p>\n\n
<\/figure>\n\n\nConnect the power adapter to the Bitaxe Gamma and plug it into an outlet.<\/p>\n\n
The device starts up immediately. Wait 30 to 60 seconds. During the very first startup, the miner sets itself as a Wi-Fi access point. You will see a network named Click on the Open your browser and go to In AxeOS, go to the tab Settings<\/strong>.<\/p>\n\n Fill in: After the restart, your router assigned a new IP address to the Bitaxe Gamma.<\/p>\n\n Look it up via: Now the pool.<\/p>\n\n Go to Settings<\/strong> Okay Mining<\/strong> in AxeOS. Choose your pool and enter the stratum address:<\/p>\n\nPublic Pool (solo mining, popular among Bitaxe users):<\/strong>\n Optionally add a worker name. Format: Click Save<\/strong> and then Reboot<\/strong>.<\/p>\n\n After 2 to 3 minutes you see the hashrate climb in AxeOS. The Bitaxe Gamma averages 1.0 to 1.4 TH\/s, depending on firmware and cooling.<\/p>\n\n Check also: Check the active firmware version in AxeOS and compare it with the latest release on the official AxeOS GitHub page<\/a>. Outdated? Update via OTA Update<\/strong> in the settings menu.<\/p>\n\n Want more hashrate? Then check out the Bitaxe Supra<\/a>.<\/p>\n\n You've finished configuring the Bitaxe Gamma, and it's up and running. But AxeOS offers more than just the basic settings. Here are the settings that make the biggest difference in performance and reliability.<\/p>\n\n By default, the Bitaxe Gamma operates at the factory settings for voltage and frequency. In the AxeOS settings under Settings > Mining<\/strong> find options to adjust this:<\/p>\n\n Safe rule of thumb: leave the factory settings as they are until you have the miner running stably for a few days. Make sure the temperature always stays below 75 degrees Celsius.<\/p>\n\n AxeOS supports automatic tuning via the Autotune<\/strong>-function. This automatically calibrates voltage and frequency for the optimal combination of hashrate and temperature. Turn it on via Settings > Advanced<\/strong>.<\/p>\n\n The Bitaxe Gamma is not a professional mining machine. It reaches about 1.1 TH\/s. For comparison: a modern Antminer S21 reaches 200+ TH\/s. That is about 180 times more.<\/p>\n\n So why set the Bitaxe Gamma for solo mining?<\/p>\n\n Do you really want to mine seriously? If so, the Bitaxe Gamma isn't the right device for you. But that's not what it's meant for anyway. Setting up the Bitaxe Gamma is a project, not a business plan.<\/p>\n\n Once you have finished configuring the Bitaxe Gamma and are connected to a pool, the miner submits work via the Stratum protocol. The pool divides the computational work into small pieces (shares) that the miner submits.<\/p>\n\n Accepted shares<\/strong> means: the pool has verified and accepted your calculation. With solo mining via Public Pool, every accepted share is proof that you are contributing to the network. Finding a block is unlikely, but the miner is doing its job.<\/p>\n\n Math problem for the pragmatic thinker:<\/p>\n\n For just a few euros a month, you get a miner that runs constantly, is educational, and gives you a small chance of mining a bitcoin block. That\u2019s the trade-off for most people who set up the Bitaxe Gamma.<\/p>\n\n The Bitaxe project is completely open-source, both hardware and software. The schematics are on GitHub. The firmware is on GitHub. Anyone can build it, improve it, and continue developing it.<\/p>\n\n In practice, the community actively contributes firmware updates, bug fixes and new features. AxeOS is updated regularly. Check the GitHub page for the latest releases. That is why the Bitaxe Gamma is popular with the technical Bitcoin community.<\/p>\n\n To summarize the steps for setting up the Bitaxe Gamma:<\/p>\n\n After configuring the Bitaxe Gamma, most devices will run stably without requiring further attention. Check the uptime and accepted shares once a week. That's all.<\/p>\n\n With a bit of extra attention you get more out of your miner and keep it healthy for longer.<\/p>\n In AxeOS, you can adjust the clock speed of the BM1370 chip. The default value is optimized for a balance between hashrate and temperature. If you want more hashrate, increase the clock speed. Keep an eye on the temperature: above 70 degrees is too hot.<\/p>\n In AxeOS, set up an automatic reboot if the pool connection is lost for more than 10 minutes. This prevents the miner from sitting idle without you noticing.<\/p>\n Public Pool displays a dashboard for each bitcoin address. Bookmark the URL with your address. Here, you can see the submitted hashes and whether the network accepts them.<\/p>\n Did you successfully configure the Bitaxe Gamma and want more hashrate? Check out the Bitaxe Supra<\/a> or the NerdQaxe++<\/a>.<\/p>\n\n Yes. All you need is a smartphone with a browser. Connect to the bitaxe Wi-Fi network, go to 192.168.4.1, and configure everything through the AxeOS web interface. You only need a computer if you want to update the firmware via OTA or the command line.<\/p><\/div><\/div>\n Virtually unlimited. Each device is assigned its own worker name. You can configure dozens of Bitaxe Gamma devices on the same pool and bitcoin address. The pool registers each worker separately.<\/p><\/div><\/div>\n AxeOS is the open-source web interface that runs on the Bitaxe Gamma itself. You can access it via a browser using the miner\u2019s IP address. Through AxeOS, you can manage Wi-Fi settings, pool configuration, voltage, frequency, and OTA updates. The name refers to the Bitaxe fork of the ESP-Miner project.<\/p><\/div><\/div>\n No. The built-in ESP32 Wi-Fi chip only supports 2.4 GHz. If you only have 5 GHz available, you must set up a router or access point that also broadcasts 2.4 GHz. Virtually all modern routers support both.<\/p><\/div><\/div>\n No. The Bitaxe Gamma does not have an Ethernet port. It connects exclusively via Wi-Fi. Ethernet is available on some other Bitaxe models, but not on the standard Gamma.<\/p><\/div><\/div>\n<\/div>\n After a few weeks of running you get a better feel for hashrate variation, temperature and stability. You also learn what the miner needs from its environment.<\/p>\n\nbitaxe<\/code> or AxeOS<\/code> appear in your Wi-Fi list.<\/p>\n\nStep 2: Connect to the access point<\/h2>\n\n
bitaxe<\/code>-network. No password required.<\/p>\n\n192.168.4.1<\/code>. You see the AxeOS web interface: the control panel of your miner. From here, you manage everything.<\/p>\n\nStep 3: Set up Wi-Fi in AxeOS<\/h2>\n\n
<\/figure>\n\n\n
\n
\n
\n
\n<\/ul>
\nClick Save<\/strong> and then Reboot<\/strong>. The Bitaxe Gamma will restart and will now connect to your own network. The access point connection will be automatically disconnected.<\/p>\n\nStep 4: Look up new IP address<\/h2>\n\n
\n
\n
\n
\n
\n<\/ul>
\nType that IP address into your browser. You are back in AxeOS.<\/p>\n\nStep 5: Setting up the mining pool<\/h2>\n\n
<\/figure>\n\n\n\n
stratum+tcp:\/\/public-pool.io<\/code><\/li>\n21496<\/code><\/li>\n\n
stratum+tcp:\/\/mine.ocean.xyz<\/code><\/li>\n3334<\/code><\/li>\n\n
stratum+tcp:\/\/stratum.braiins.com<\/code><\/li>\n3333<\/code><\/li>\nStep 6: Set worker name and save<\/h2>\n\n
streetname.employeename<\/code>. Handy for when you have multiple miners later.<\/p>\n\nStep 7: Check hashrate and temperature<\/h2>\n\n
<\/figure>\n\n\n
\n
\n
\n
\n<\/ul>
\nDo you see accepted shares coming in? Then everything is working correctly.<\/p>\n\nStep 8: Check firmware<\/h2>\n\n
Done: Setting up the Bitaxe Gamma is complete<\/h2>\n\n\n\n\n\n
Setting the Bitaxe Gamma: Advanced AxeOS Settings<\/h2>\n\n
Adjust voltage and frequency<\/h3>\n\n
\n
ASIC autotune<\/h3>\n\n
Bitaxe Setting the Gamma: What Is Solo Mining, and When Should You Choose It?<\/h2>\n\n
\n
Setting the Bitaxe Gamma: Understanding the Connection to the Pool<\/h2>\n\n
\nRejected shares<\/strong> are not a disaster, but a high ratio is a sign that something is wrong with the connection or settings.<\/p>\n\nSetting the Bitaxe Gamma: Energy and Costs<\/h2>\n\n
\n
Setting the Bitaxe Gamma: The Open-Source Aspect<\/h2>\n\n
Setting Up the Bitaxe Gamma: From Out of the Box to a Running Miner, A Summary<\/h2>\n\n
\n
Troubleshooting: most common problems<\/h2>\n\nWi-Fi connection failed<\/strong>\nCheck if your network is on 2.4 GHz. Are you hiding your SSID? Make it temporarily visible. Special characters in the password? Try a network without them.\n\nAxeOS unreachable after restart<\/strong>\nGive the miner 60 seconds. Use an IP scanner if you have lost the IP address. If necessary, assign a static IP address via your router.\n\nHashrate is at zero<\/strong>\nCheck the stratum address and port for typos. Check if the pool is online via the status page of the respective pool.\n\nTemperature above 70 degrees<\/strong>\nProvide better air circulation. An open space or a small USB fan next to the miner usually solves this.\n\nNo accepted shares after 10 minutes<\/strong>\nCheck your worker\/username settings. The bitcoin address must be valid. Some pools require a specific format.\n\n
Frequently Asked Questions About Setting Up Bitaxe Gamma<\/h2>\n\n
bitaxe<\/code>open Wi-Fi network 192.168.4.1<\/code> in the browser and configure your own Wi-Fi and mining pool via AxeOS. After a reboot, the miner is active.<\/div><\/div>\n192.168.4.1<\/code> to the built-in access point. Then via the IP address that your router has assigned.<\/div><\/div>\n<\/div>\nOn to your first hash<\/h2>\n\n\n\nP.S.<\/strong> Stuck? Feel free to ask, and I will help you out.
Setting the Bitaxe Gamma: Advanced Tips<\/h2>\n\n
Adjust clock speed<\/h3>\n
Set up automatic restart<\/h3>\n
Track results<\/h3>\n
Setting the Bitaxe Gamma: Additional Frequently Asked Questions<\/h2>\n\n
Setting the Bitaxe Gamma: Your Next Step<\/h2>\n\n